I can not build Linux (2.16.0) for HAD Solution Kit.
Revision as of 1 March 2017 at 10:45.
This is the thread's initial revision.
This is the thread's initial revision.
I am trying to build Linux (2.16.0) for HAD Solution Kit.
However, the following error message appears and can not be built.
Is there anything you can understand?
ERROR: gstreamer1.0-plugins-bad-1.6.3-r0 do_init_submodule: Function failed: do_init_submodule (log file is located at /mnt/work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.6.3-r0/temp/log.do_init_submodule.18637) ERROR: Logfile of failure stored in: /mnt/work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.6.3-r0/temp/log.do_init_submodule.18637 ERROR: Task 1796 (/mnt/work/build/../poky/meta/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bb, do_init_submodule) failed with exit code '1' ERROR: gstreamer1.0-plugins-good-1.6.3-r0 do_init_submodule: Function failed: do_init_submodule (log file is located at /mnt/work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-good/1.6.3-r0/temp/log.do_init_submodule.23409) ERROR: Logfile of failure stored in: /mnt/work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-good/1.6.3-r0/temp/log.do_init_submodule.23409 ERROR: Task 1782 (/mnt/work/build/../poky/meta/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bb, do_init_submodule) failed with exit code '1' ERROR: kernel-module-vspm-1.0-r0 do_populate_lic: The recipe kernel-module-vspm is trying to install files into a shared area when those files already exist. Those files and their manifest location are: /mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/generic_MIT Matched in manifest-salvator_x-kernel-module-vspm.populate_lic /mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/GPL-COPYING Matched in manifest-salvator_x-kernel-module-vspm.populate_lic /mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/generic_GPLv2 Matched in manifest-salvator_x-kernel-module-vspm.populate_lic /mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/recipeinfo Matched in manifest-salvator_x-kernel-module-vspm.populate_lic /mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/MIT-COPYING Matched in manifest-salvator_x-kernel-module-vspm.populate_lic Please verify which recipe should provide the above files. The build has stopped as continuing in this scenario WILL break things, if not now, possibly in the future (we've seen builds fail several months later). If the system knew how to recover from this automatically it would however there are several different scenarios which can result in this and we don't know which one this is. It may be you have switched providers of something like virtual/kernel (e.g. from linux-yocto to linux-yocto-dev), in that case you need to execute the clean task for both recipes and it will resolve this error. It may be you changed DISTRO_FEATURES from systemd to udev or vice versa. Cleaning those recipes should again resolve this error however switching DISTRO_FEATURES on an existing build directory is not supported, you should really clean out tmp and rebuild (reusing sstate should be safe). It could be the overlapping files detected are harmless in which case adding them to SSTATE_DUPWHITELIST may be the correct solution. It could also be your build is including two different conflicting versions of things (e.g. bluez 4 and bluez 5 and the correct solution for that would be to resolve the conflict. If in doubt, please ask on the mailing list, sharing the error and filelist above. ERROR: kernel-module-vspm-1.0-r0 do_populate_lic: If the above message is too much, the simpler version is you're advised to wipe out tmp and rebuild (reusing sstate is fine). That will likely fix things in most (but not all) cases. ERROR: kernel-module-vspm-1.0-r0 do_populate_lic: Function failed: sstate_task_postfunc ERROR: Logfile of failure stored in: /mnt/work/build/tmp/work/h3ulcb-poky-linux/kernel-module-vspm/1.0-r0/temp/log.do_populate_lic.16804 ERROR: Task 1578 (/mnt/work/build/../meta-renesas/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb, do_populate_lic) failed with exit code '1'