Difference between revisions of "Thread:User talk:Impressx/Arduino Shield Adapter"
(New thread: Arduino Shield Adapter) |
m (→Descriptions) |
||
| Line 1: | Line 1: | ||
==Descriptions== | ==Descriptions== | ||
| − | [[File: | + | [[File:ArduinoCape.jpg|border|right|link=|300px|BeagleBone LCD Cape]] |
The Shield I/O Cape provides the ability to mount (almost) every Arduino Shield on the BeagleBone Black, no matter if it’s using 3.3V or 5V logic levels. Changing from 3.3V to 5V is done by software. It can also be ordered with an onboard 16 pin I/O expander which is accessible over the I2C bus. | The Shield I/O Cape provides the ability to mount (almost) every Arduino Shield on the BeagleBone Black, no matter if it’s using 3.3V or 5V logic levels. Changing from 3.3V to 5V is done by software. It can also be ordered with an onboard 16 pin I/O expander which is accessible over the I2C bus. | ||
Revision as of 13:11, 10 February 2014
Descriptions
The Shield I/O Cape provides the ability to mount (almost) every Arduino Shield on the BeagleBone Black, no matter if it’s using 3.3V or 5V logic levels. Changing from 3.3V to 5V is done by software. It can also be ordered with an onboard 16 pin I/O expander which is accessible over the I2C bus.
