Difference between revisions of "User:Hj-alceol"
(→An 4€ RPi case) |
(→An 4€ RPi case) |
||
Line 22: | Line 22: | ||
# Print a Raspberry Pi logo and glue it | # Print a Raspberry Pi logo and glue it | ||
− | The libreCad file could be downloaded : [[File:Raspberry-pi-3mm-foamboard-case.dxf | Raspberry Pi Foam Case]] | + | The libreCad file could be downloaded : [[File:Raspberry-pi-3mm-foamboard-case.dxf | Raspberry Pi Foam Case]] and |
+ | the [[File:Raspberry-pi-3mm-foamboard-case-strips.dxf | Raspberry Pi Foam Strips ]] | ||
3d views of the case : | 3d views of the case : |
Revision as of 00:37, 25 July 2012
HJ-Alceol
Projects
- RPi Art FoamCardBoard case In Case Page
- RPNuino
An 4€ RPi case
When having an RPi for 30€, buying a 15€ case is quit expensive. I decided to create this case. You just need :
- An 21x29.7 Art foam Cardboard
- Cutter
- Glues : sticker and gel
How to :
- Print the template with the right scale
- Validate the sizes
- Glue the template on the board using the glue sticker
- Cut, assemble and glue using the glue gel
- If the RPi will stay powered for a long time. A few vent holes could be added
Final touch:
- Print a Raspberry Pi logo and glue it
The libreCad file could be downloaded : File:Raspberry-pi-3mm-foamboard-case.dxf and the File:Raspberry-pi-3mm-foamboard-case-strips.dxf
3d views of the case :
RPNuino
This project aims to interface an Arduino stack thru the standard USB port. It will be coupled with an RPN kindof calculator allowing a Php/Apache stack to send commands and retrieve information on the Arduino.
The RPi runs under Arch linux with only the eth0 connection.
Work in progress !