User:Lesterwm

Status Report

Listings

Chapter 4

Not Done

Chapter 5

Done

Chapter 6

Not Done

Chapter 7

Not Done

Chapter 8

Not Done

Labs

Lab 00

Status: Complete

Observations: N/A (I already had linux installed)

Answers: N/A

Lab 01

Status: Complete

Observations: Using the SPED image, you can't boot your Beagle using USB OTG for power (it throws a kernel panic). This is because the kernel image included on image does not have the necessary USB gadget module built-in (its a dynamic module).

Answers: N/A

Lab 02

Status: Complete

Observations: Build.tar.gz is absolutely huge. Is all of that necessary? I find myself building the kernel outside of the OE tree because it is just too complicated otherwise. This is a great lab and one that I kept coming back to, its extremely important to the course

Answers: N/A

Lab 03

Status: Incomplete

Observations:

Answers:

Lab 04

Status: Done

Observations: This lab is incomplete, but following its spirit, I configured the kernel to my liking. I had to reconfigure from the default Angstrom configuration when I wanted to get networking and power over USB working, since the USB OTG gadget had to be compiled into the kernel (it can't by a dynamic module). I used gconfig to configure it.

Answers: N/A

Lab 05

Status: Complete

Observations: I completed this short lab as part of Lab 08. In that lab I added an Example character device module to the necessary Kconfig file.

Answers: N/A

Lab 06

Status: Complete

Observations: I've spent a lot of time on this subject while trying to get static MAC addresses working. I wrote up a wiki article based on what I learned. See ECE497 Modifying Kernel Command Line Parameters.

Answers: N/A

Lab 07

Status: Not Started

Observations:

Answers:

Lab 08

Status: Complete

Observations: This is definitely my favorite lab. Very well constructed, challenging but not impossible.

Answers:

1. The major device number 234 is part of a range of unassigned numbers. What is the range? 231-239
2. What's the new line added to hello_init do? Registers this device driver with the given major number (234) and tells the kernel where to find the required file operation functions (open, read, write, ...)
3. What does mknod do? Creates a file in /dev/ that represents the device with the given major number (in our case, 234)
4. Once your device is running try $ cat /proc/devices. Do you see your device? Yes
5. Convert the example in our text to use the newer method. It's only a couple of additional lines, but you will have to read the book to know how to do it. Done. See hello.c in Hello.tgz
6. Modify the scull_load script (call it hello_load) on page 47, of chapter 3, to load your module. Done. See hello_load in Hello.tgz
7. Test it with use-hello.c from page 222 of Embedded Linux Primer. Done
8. Write a hello_unload script that will rmmod the driver and remove the nodes in /dev Done. See hello_unload in Hello.tgz
9. Modify hello.c to pass the major device number in as a parameter during insmod. Done. See hello.c in Hello.tgz

Optional: Stretch time, I though these would be easy, but after reading up on them, they look rather involved.

1. How can your driver find what the minor device number is? When the device is opened, an inode reference is passed. There is a macro called 'iminor' which takes an inode and returns the minor number.

static int hello_open(struct inode *inode, struct file *file) 
{
   /* We can change the logic of this function based on the 
    * minor number of our device */
   printk("hello_open: successful opened minor number %u\n", 
       iminor(inode)); 
   
   return 0;
}

Lab 09

Status: Not Started

Observations:

Answers:

Lab 10

Status: Partially Complete

Observations:

Answers:

Lab 11

Status: Not Started

Observations:

Answers:

Lab 12

Status: Not Started

Observations:

Answers:

Lab 13

Status: Not Started

Observations:

Answers:

ECE497 Pages

These are pages that I have created in order to help the current and next class of ECE497 - Embedded 32-bit Linux

ECE497 Networking over USB

ECE497 Modifying Kernel Command Line Parameters